|
|
 |
|
|
·
Home ·
Products ·
Special Offers ·
Policies ·
Contact Us ·
About Us ·
|
|
|
Our Gas Transfer Pump is made by Fillrite or Gasboy. Your gas transfer pump order will ship today.
|
|
|
| Other Gas Transfer Pumps are in Stock. For Help With Questions Call 1-800-952-7339 |
|
 |
M-150S-MU
Standard 12 Volt Electric GPI Pump for fuel with manual unleaded nozzle, 15'
power cord, 3/4"X12' hose and adjustable suction pipe. Up to 15 gpm. |
$277.00
|
|
|
M-150S-EM
This is the same 12 volt pump as above in the economy version. Includes 18' power
cord, 3/4" x 10' hose, suction pipe and manual unleaded nozzle. Will deliver up to 15 GPM. |
$258.00
|
|
|
EZ-8 PUMP
is a 12 volt pump that delivers 8GPM (equivalent to a standard gas station
pump). The system comes complete with power cord, manual unleaded nozzle, three piece suction pipe and
a 10' X 5/8" hose. Motor is UL listed to US and Canadian standards. The pump has a 2 year warranty.
|
$208.00
|
|
| FR152
Piston Hand Pump will work with gasoline, diesel fuel, hydraulic oil,
and non-corrosive petroleum based fluids. This UL Listed Fill Rite Hand Pump will move 20 gallons of product per 100 strokes.
It includes an external anti-siphoning valve, check valve, and
a strainer. Like the rotary hand pump, this model may be set up for reverse flow. FR152 is a very good gas transfer pump
because it is adaptable for drums, kegs and storage tanks. Parts Manual for FR152 |
$146.00
|
|
|
FR610C Heavy Duty 115 Volt Fill Rite Gas Transfer Pump has a 1/4 HP explosion proof motor, 3/4" X 12' hose
and manual nozzle. Flow rate is up to 15 gallons per minute. This unit has a 2 Year Warranty, 1" inlet, 3/4" discharge and
fits a 2" opening in a tank. The gas transfer pump housing has is constructed of cast iron, the rotor is composed of iron and the vanes are machined for the best
quality possible. This model pump has a bypass valve and a built in strainer. It may be padlocked and it has a nozzle
boot for protection from dirt. It has thermal overload protection and a 30 minute duty cycle.
Parts Manual for FR610C |
$330.00
|
|
 |
FR700 Heavy Duty 115 Volt Fill Rite Gas Transfer Pump has a 1/3 HP explosion proof motor with ball bearings, 3/4" X 12' hose and manual nozzle. The maximum
flow rate with the factory provided hose and nozzle is 20 gallons per minute. This unit has a 2 Year Warranty and has thermal
overload protection and a duty cycle of 30 minutes. The inlet on this unit is 1", the discharge is 3/4" and it fits into a 2" opening on a tank.
This model has a bypass valve, a built in strainer, and an integral check valve. It also has a nozzle boot to protect from dirt and machined
carbon vanes. Parts Manual for FR700 |
$424.00
|
|
|
FR701 Same Fill Rite gas transfer pump as above with a meter.
The 807 meter is 50 PSI and constructed of aluminum. With the meters large easy to read numbers, it has a master
totalizer and a resetable cumulative totalizer that reads 99.9 gallons or 999 liters. The meter also has flexible ports
for horizontal or verticle positioning. UL listed.
|
$563.00
|
|
| Other Gas Transfer Pumps are in Stock. For Help With Questions Call 1-800-952-7339 |
|
|
|
Home |
Products |
View Cart
|
|