Your gasoline transfer pump order will ship today.
|
| ||
| · Home · Products · Special Offers · Policies · Contact Us · About Us · | ||
| Our 12 volt gasoline pump is
made by Fillrite or GPI. Your gasoline transfer pump order will ship today. | ||
| Other Gasoline Transfer Pumps are in Stock. For Help With Questions Call 1-800-952-7339 | ||
| EZ-8 PUMP is a 12 volt gasoline pump that delivers 8 GPM (equivalent to a standard gas station pump). The system comes complete with power cord, manual unleaded nozzle, three piece suction pipe and a 10' X 5/8" hose. Motor is UL listed to US and Canadian standards. This gas transfer pump has a 2 year warranty. |
$208.00
|
|
|
FR1210C Fill Rite Heavy Duty 12 Volt Gasoline Pump can be used for diesel and kerosene as well as gasoline. Gas transfer pump includes 3/4" X 12' grounded hose, manual nozzle, suction tube, power cord and a 2 year warranty. The pump housing on this gasoline pump is made of cast iron, the rotor is composed of iron and it's capacity is up to 15 gallons per minute. It draws 20 amps from the battery and has thermal overload protection, causing the 12 volt gasoline transfer pump to shut off after a 30 minute duty cycle. The motor on this 12 volt gasoline pump is 1/4 HP and is explosion proof with 2 sealed ball bearings. Includes nozzle hanger and built in check valve. Parts Manual for FR1210C |
$297.00
|
|
|
M-150S-MU Standard GPI 12 Volt Gasoline Transfer Pump with proven dependability and efficiency. Included with this unit manual unleaded nozzle, 15'power cord, 3/4"X12' grounded hose and adjustable suction pipe. 12 Volt Gasoline Transfer Pump motor is UL Listed and CSA Certified. Convenient spine on collar for easy installation. Overload Protected Motor for long life. This Gas Transfer Pump has a 2 year warranty and will deliver up to 15 gpm. Installation Manual for M-3025 |
$277.00
|
| M-3025-ML Use this High Performance 12 Volt Gasoline Transfer Pump on vehicle mounted tanks or vented storage tanks with a 2" NPT opening. Super Fast GPI 12 Volt Gasoline Transfer Pump has the highest flow rate in the industry. The .4 HP motor can deliver diesel up to 25 Gpm and will reduce refueling time by nearly half. The gas transfer pump has 1" X 12' grounded hose, 1" diesel manual nozzle and 15' power cord. Nozzle can be padlocked and automatic nozzle is available. Recommended for use with diesel fuel biodiesel blends (B20), gasoline (alcohol blends (E15) and kerosene. Not for use with water. This Gas Transfer Pump has a Two Year Warranty. Installation Manual for M-3025 | $457.00
|
|
| FR610C Heavy Duty 115 Volt Fill Rite Gasoline Transfer Pump has a 1/4 HP explosion proof motor, 3/4" X 12' hose and manual nozzle. Flow rate is up to 15 gallons per minute. Gasoline Pump has a 2 Year Warranty, 1" inlet, 3/4" discharge and fits a 2" opening in a tank. The gasoline transfer pump housing has is constructed of cast iron, the rotor is composed of iron and the vanes are machined for the best quality possible. This model pump has a bypass valve and a built in strainer. It may be padlocked and it has a nozzle boot for protection from dirt. It has thermal overload protection and a 30 minute duty cycle. Parts Manual for FR610C |
$330.00
|
|
FR700 Fill Rite Gasoline Transfer Pump housing is constructed of cast iron. Maximum flow rate with factory hose and nozzle is 20 gallons per minute. Has Iron rotor composition, 1/3 HP explosion proof motor with ball bearings, thermal overload protection, bypass valve, built in strainer, and integral check valve. Machined carbon vanes and 30 minute duty cycle. Gasoline Pump has 1 inch NPT inlet, 3/4 inch NPT outlet and 2" NPT bung adaptor. Recommended for gasoline or diesel fuel. Gasoline pump has a 3/4" X 12' hose, manual nozzle and a two year warranty. May be padlocked and is UL Listed. Installation Manual for FR700 & FR701. | $424.00
|
| FR701 Same Fill Rite Gasoline Transfer Pump as above except with a 3 wheel aluminum constructed mechanical flow meter. Pressure rating is 50 PSI and has large easy to read numbers. Resetable cumulative totalizer goes up to 99.9 gallons and the master totalizer goes up to 99,999.9 gallons. UL Listed. | $563.00
| |
|
FR152 Piston Hand Gasoline Pump will work with gasoline, diesel fuel, hydraulic oil, and non-corrosive petroleum based fluids. This UL Listed Fill Rite Hand Pump will move 20 gallons of product per 100 strokes. It includes an external anti-siphoning valve, check valve, and a strainer. Like the below rotary hand pump, this model may be set up for reverse flow. FR152 is a very good gas hand pump because it is adaptable for drums, kegs and storage tanks. Parts Manual for FR152 |
$146.00
|
| Other Gasoline Transfer Pumps are in Stock.For Help With Questions Call 1-800-952-7339 | ||
| Home | Products | View Cart | ||